High dry solids digestion

Kepp U., Panter, K., Solheim O.E.

Proc. of the European Biosolids and Organic Resources Conference, Wakefield, UK, 2001

Abstract

Digestion of sewage sludge normally takes place at pH values between 7,0 and 7,5. Control methods of the process stability are based on practical experience such as the ratio of volatile fatty acids (VFA) and total alkalinity (TA). Thermal sludge disintegration
for an enhanced digestion process allows a digester feed with higher dry solids concentrations. This is due to an opening of cell mass and lower viscosity of the treated sludge. At the same time the degradation of cell proteins is increased, resulting in higher
ammonia concentrations and subsequently higher TA concentrations and pH values. At HIAS, Norway, thermal disintegrated sludge has been digested for several years with a volatile solids reduction by over 55%. Both pH values and VFA concentrations varied over time. Based on these measurements a recommendation is given for a changed stability control of the digestion process at pH values above 7,5.
 

 

img

Write your own success story

Seen what we've done for others? Let’s chat about how we can do the same for you. Get in touch with our team to learn how thermal hydrolysis can transform your plant, too.

Talk to our team